How do we stop audio echo during a session or self-tape?
Why do people hear an echo on their end when working with me (microphone, speaker, and noise cancellation setup)?
If your scene partner or reader says they hear an echo when working with you—even though you cannot hear any echo on your end and haven't physically changed your setup—it means your microphone is picking up their voice coming out of your speakers and sending it back to them.
In video sessions, the person causing the echo almost never hears it themselves; instead, the other participant hears their own voice bouncing back a split-second later.
***
1. Actors vs. Readers: Why Echo Happens
- If you are the Reader (off-camera): The fastest 100% fix is to wear wired headphones or earbuds. Because no sound comes out of your speakers, your microphone can never send the actor's voice back to them.
- If you are the Actor (on-camera): Because you are on camera for an audition or self-tape, you cannot wear headphones or earbuds. Instead, WeAudition relies on Acoustic Echo Cancellation (AEC) and proper microphone/speaker pairing to keep your partner's voice out of your mic.
***
2. Check Your Microphone & Speaker Selection in the Room
Even if you haven't touched your physical gear, a browser update, macOS/Windows update, plugging in a webcam or external monitor, or a Bluetooth device waking up can silently change which microphone or speaker Chrome is using.
WeAudition's Acoustic Echo Cancellation works best when your computer knows the exact relationship between your active speaker and microphone. If your partner's voice plays out of an external monitor or laptop speakers while a different webcam or USB microphone listens across the room, echo cancellation can struggle.
How to verify inside the WeAudition room (On a browser):
- Click the Settings tab (gear icon) on the right side of the session room.
- Check Audio Source (Microphone): Make sure the exact microphone you intend to use (such as your lavalier, shotgun, or built-in mic) is selected—not a webcam mic or monitor mic sitting near your speakers.
- Check Speaker / Headphones: Confirm the correct audio output device is selected.
- Watch the Microphone Level meter: Have your partner speak while you stay silent. If your Microphone Level bar jumps while they are talking, your mic is picking up your speakers.
***
3. What Does the Noise Cancellation ("Audio Mode") Setting Do?
Inside the room's Settings tab under Audio Mode, WeAudition provides two voice processing modes that control how we handle background noise and microphone sensitivity:
- `Standard Noise Filter` (Noise Cancellation ON — Recommended if partner hears echo):
- Turns on WebRTC Noise Suppression and Auto Gain Control alongside Echo Cancellation.
- Actively filters out room hum (A/C, computer fans) and suppresses speaker bleed between your lines so your partner's voice isn't re-transmitted back to them.
- Tip: If people suddenly complain about echo on their end, switch Audio Mode to `Standard Noise Filter`.
- `Studio / Original Voice` (Noise Cancellation OFF):
- Turns off Noise Suppression and Auto Gain Control (while keeping basic echo cancellation active) and increases audio bitrate so quiet whispers, subtle breaths, and loud dramatic shouts aren't gated or clipped.
- Important for Actors without headphones: Because
Studio / Original Voicedisables noise suppression and gating, a sensitive external USB, condenser, or shotgun microphone in an untreated room is much more likely to pick up sound from your speakers and cause an echo for your partner.
***
4. On-Camera Actor Checklist to Stop Echo Without Headphones
Since you cannot wear headphones on camera as an Actor, follow these steps in order:
- Switch Audio Mode to `Standard Noise Filter`: In the room Settings tab, select Standard Noise Filter so background noise suppression helps gate out speaker bleed when you aren't speaking.
- Lower your physical speaker volume slightly (to 40%–60%): Turn your laptop, monitor, or iPad speaker volume down just enough that you can still comfortably hear your Reader's cues without filling the room with sound.
- Select the right microphone in Room Settings: Under Audio Source, ensure you haven't accidentally defaulted to a webcam or omnidirectional room mic pointed at your speakers.
- Increase distance between your mic and speakers:
- If using a lavalier mic, clip it close to your chest pointed toward your mouth and step back from your laptop/monitor speakers.
- If using a directional/shotgun or USB mic, angle the front of the mic toward your mouth and point the rear/null side of the mic toward your computer speakers.
- Use Google Chrome on Desktop: Google Chrome has the strongest built-in WebRTC hardware Acoustic Echo Cancellation (
echoCancellation) for our video sessions.